Advanced Air - Model Series 35S VAV

enlarge image

Models:

35S Cooling Only

35SE Electric Heat

35SW Hot Water Heat

The Model 35S provides many standard design features and superior sound performance when compared with other basic model designs. The 35S offers a compact and economical design well suited to the majority of applications.

For specialised assistance call 01842 855 545 or contact us

Product Information

Unique 18 swg (1.2mm thick) galvanised steel channel space frame construction provides extreme rigidity and 18 swg casing components.
1.2mm thick galvanised steel inclined opposed blade primary air damper operating on a 45° arc.
Unique perforated baffle on primary air discharge optimises mixing with induced air for rapid and effective temperature equalisation. The baffle also converts low frequency primary air damper generated sound into more readily attenuated higher frequencies.
Pressure independent primary airflow control.
Multi-point averaging flow sensor.
Terminal may be field installed either way up, providing the additional flexibility of right or left field connections.
Access panels on three sides of terminal for ease of maintenance and service to motor and fan from below or from the side of unit.
Energy saving Nailor EPIC fan technology
Motor fan assembly mounted on special 1.6 mm thick angles and isolated from casing with rubber isolators.
Removable door on controls enclosure
Acoustic/thermal lining - the terminalis internally lined with a 25mm thick acoustic/thermally insulating foam which is Melamine based open cellular construction, having a nonwoven black tissue facing and complying with class O fire rating. This material is adhered to all internal surfaces and inside box/channel sections.
Available with electric or hot water supplementary heat.
All controls are mounted on exterior of terminal providing ready access for field adjustment.
Each terminal factory tested prior to shipment.
Single point electrical connections.
Discharge opening designed for flanged duct connection.

Secondary Attenuators:

All Nailor terminal units are available with attached secondary attenuators

Casing:

Manufactured from 18 swg. (1.2mm thick) folded galvanised mild steel sheet, formed into a rectangular casing, all longitudinal casing joints are mechanically sealed.

Flanges:

Intake and discharges incorporate rectangular flanges, which are mechanically fixed to the main body of the attenuator.

Splitters:

Arranged within the casing are vertical attenuating splitter sections manufactured from 21 swg. (0.8mm thick) galvanised mild steel, fixed to the casing by rivets. Splitters are fitted at inlet and discharge with aerodynamically shaped bullnose fairings. Splitters are fitted with 22 swg. (0.7mm thick) expanded or perforated metal facings. Horizontal splitters are also available if required.

Acoustic infill:

Splitters and side linings are filled with an inert, non combustible, non hygroscopic, vermin and rot proof mineral fibre slab which will not support bacterial growth. Usually faced with a glass fibre tissue (FB), however hermetically sealed Melinex membrane bags (FG) are available wherever indoor air quality conditions demand.

Energy Efficient Air Management

Model Series 35S VAV

enlarge image

Models:

Product Information

Product Brochure

Secondary Attenuators:

Casing:

Flanges:

Splitters:

Acoustic infill:

Projects to be proud of

Categories

Products

Services

Why Us

Contact Us